Canon imageRUNNER 2030i E002 0000 Error Code Instructions
Below you will find the service manual information for the Canon imageRUNNER 2030i E002 0000 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it.
Service Manual Instructions for the Canon imageRUNNER 2030i E002 0000 Error Code
Low temperature during temperature control.
The target temperature is not reached during temperature control.
Check the connector of the fixing film unit.
Replace the fixing film unit.
Replace the DC controller PCB.
Take into account, not every error is exactly the same. What treats the difficulty one time will possibly not remedy it the next occasion. While the data in this post is taken from the service manual and generally should get your equipment operating, now and again other variables might be in play.
If you are reading this article and have information about this fault and would wish to share be sure to leave a comment beneath. Or, if you have read this article and have additional questions then ask. If I have experience with the trouble then I will reply.