Canon imageRUNNER 2535 E001 0002 Error Code Instructions
Below you will find the service manual information for the Canon imageRUNNER 2535 E001 0002 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it.
Service Manual Instructions for the Canon imageRUNNER 2535 E001 0002 Error Code
The reading of the sub thermistor is 295 deg C or more continuously for 200 msec.
1.Go through the following to clear the error: CLEAR > ENGIN > ERRCLR; and then turn OFF and then ON the power.
2.Check connection of the Connectors (Thermistor Connector and AC Connector).
3.Replace the Fixing Main Thermistor (Film Unit).
4.Replace the Fixing Assembly.
5.Replace the DC Controller PCB (PCB4).
Remember, not every error is absolutely identical. What fixes the situation one time might not get rid of it the next occasion. While the material in this text is inspired by the service manual and most likely should get your equipment ready to go, from time to time additional variables might be in play.
If you’re looking over this piece of content and have exposure to this fault and desire to make a contribution make sure you leave a comment underneath. Or, if you have read this article and have more questions then ask. If I have exposure to the problem then I will reply.