Canon imageRUNNER 2535I E110 0001 Error Code Instructions
Below you will find the service manual information for the Canon imageRUNNER 2535I E110 0001 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it.
Service Manual Instructions for the Canon imageRUNNER 2535I E110 0001 Error Code
The Scanner Motor (M21) speed lock signal does not indicate a locked state a specific period of time after the ScannerMotor (M21) has been started.
* The same condition is detected after the error retry is performed.
1.Check the cable.
2.Replace the Laser Scanner Unit.
3.Replace the DC Controller PCB (PCB4).
Realize, not every error is totally the same. What treats the difficulty one time might not exactly remedy it the next occasion. While the details in this writing obtain from the service manual and typically should get your device operating, sometimes other elements could possibly be in play.
If you’re looking over this article and have exposure to this error and want to share please leave a comment underneath. Or, if you have read this article and have more questions then ask. If I have knowledge about the issue then I will respond.