Canon imageRUNNER 2535I E110 0002 Error Code Instructions
Below you will find the service manual information for the Canon imageRUNNER 2535I E110 0002 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it.
Service Manual Instructions for the Canon imageRUNNER 2535I E110 0002 Error Code
The speed lock signal indicates a deviation 10 times in sequence at intervals of 100 msec after the signal has indicated a locked state.
* The same condition is detected after the error retry is performed.
1.Check the cable.
2.Replace the Laser Scanner Unit.
3.Replace the DC Controller PCB (PCB4).
Realize, not every error is totally the same. What remedies the situation one time may possibly not fix it the next occasion. While the details in this written piece comes from the service manual and normally should get your machine operating, at times other things might be in play.
If you’re looking over this article and have experience with this malfunction and want to make a contribution make sure you leave a comment underneath. Or, if you have read this article and have additional questions then ask. If I have exposure to the problem then I will respond.