Canon imageRUNNER 2535I E202 0000 Error Code Instructions
Below you will find the service manual information for the Canon imageRUNNER 2535I E202 0000 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it.
Service Manual Instructions for the Canon imageRUNNER 2535I E202 0000 Error Code
1.The attempt to detect the home position fails when the CCD is moved forward.
2.The attempt to detect the home position fails when the CCD is moved back.
1.Disconnect and then connect the flexible cable(Relay PCB (PCB2)-Main Controller PCB (PCB1) 64pin).
2.Replace the flexible cable.
3.Replace the CCD HP sensor (S22).
4.Replace the Scanner Motor (M21).
5.Replace the Relay PCB (PCB2).
6.Replace the Main Controller PCB (PCB1).
Realize, not every error is totally identical. What corrects the malfunction one time may possibly not remedy it the next time. While the information in this text obtain from the service manual and in most cases should get your equipment working, in some cases additional factors may be in play.
If you’re looking at this write-up and have knowledge of this malfunction and want to make a contribution be sure to leave a comment beneath. Or, if you have read this article and have additional questions then ask. If I have experience with the problem then I will answer back.