Canon imageRUNNER 2535I E248 0000 Error Code Instructions
Below you will find the service manual information for the Canon imageRUNNER 2535I E248 0000 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it.
Service Manual Instructions for the Canon imageRUNNER 2535I E248 0000 Error Code
1.An error has occurred at power-on.
2.An error has occurred during write operation.
3.An error has occurred during read operation following write operation.
1.Disconnect and then connect the flexible cable(Relay PCB (PCB2)-Main Controller PCB (PCB1) 50pin).
2.Disconnect and then connect the flexible cable(CCD unit- Relay PCB (PCB2)).
3.Disconnect and then connect the power supply harness connector.
4.Replace the flexible cable.
5.Replace the CCD Unit.
6.Replace the Relay PCB (PCB2).
7.Replace the Power Supply PCB (PCB3).
8.Replace the Main Controller PCB (PCB1).
Realize, not every error is simply identical. What fixes the situation one time might not exactly remedy it the next time. While the content in this article is obtained from the service manual and generally should get your equipment functioning, on occasion other factors might be in play.
If you’re looking at this write-up and have information about this malfunction and would wish to share please be sure to leave a comment beneath. Or, if you have read this article and have additional questions then ask. If I have experience with the problem then I will reply.