Canon imageRUNNER 2535I E261 0000 Error Code Instructions
Below you will find the service manual information for the Canon imageRUNNER 2535I E261 0000 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it.
Service Manual Instructions for the Canon imageRUNNER 2535I E261 0000 Error Code
Zero Cross failed to be detected for 500ms or more while the relay was ON.
* The same condition is detected after the error retry is performed.
1.Check the Connectors.
2.Replace the DC Controller PCB (PCB4).
Realize, not every error is simply identical. What corrects the trouble one occasion will possibly not eliminate it the next occasion. While the details in this blog post hails from the service manual and most often ought to get your device functioning, now and again additional variables may be in play.
If you’re looking at this write-up and have information about this error and want to share please make sure to leave a comment down the page. Or, if you have read this article and have additional questions then ask. If I have information about the difficulty then I will answer back.