Canon imageRUNNER 2535I E567 0002 Error Code Instructions
Below you will find the service manual information for the Canon imageRUNNER 2535I E567 0002 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it.
Service Manual Instructions for the Canon imageRUNNER 2535I E567 0002 Error Code
The shift roller does not return to the shift roller release home position when the Shift Roller Release Motor (M5) has been driven for 0.06 sec.
1.Replace the Shift Roller Release Sensor (S3).
2.Replace the Shift Roller Release Motor (M5).
3.Replace the Finisher Controller PCB (PCB1).
Realize, not every error is exactly the same. What treats the difficulty one time will possibly not fix it the next occasion. While the ideas in this text comes from the service manual and usually should get your equipment operating, at times other causes could possibly be in play.
If you’re looking at this short article and have knowledge of this fault and would like to make a contribution make sure you leave a comment down the page. Or, if you have read this article and have more questions then ask. If I have experience with the problem then I will respond.