Canon imageRUNNER 2535I E575 0002 Error Code Instructions
Below you will find the service manual information for the Canon imageRUNNER 2535I E575 0002 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it.
Service Manual Instructions for the Canon imageRUNNER 2535I E575 0002 Error Code
The gripper unit does not return to the gripper unit home position when the Gripper Unit Move Motor (M2) has been driven for 0.1 seconds.
1.Replace the Gripper Unit HP Sensor (S7).
2.Replace the Gripper Unit Move Motor (M2).
3.Replace the Finisher Controller PCB (PCB1).
Realize, not every error is exactly identical. What fixes the malfunction one occasion might not exactly take care of it the next occasion. While the specifics in this short article originates from the service manual and most likely ought to get your device operating, at times additional variables can be in play.
If you’re looking at this short article and have knowledge about this problem and would like to contribute you should leave a comment underneath. Or, if you have read this article and have more questions then ask. If I have exposure to the trouble then I will respond.