Canon imageRUNNER 2535I E804 0000 Error Code Instructions
Below you will find the service manual information for the Canon imageRUNNER 2535I E804 0000 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it.
Service Manual Instructions for the Canon imageRUNNER 2535I E804 0000 Error Code
When lock signal is detected for 5 sec while the Power Supply Cooloing Fan (FAN6) is stopped.
* The same condition is detected after the error retry is performed.
1.Disconnect and then connect the connector (J205) on the DC Controller PCB (PCB4).
2.Replace the Power Supply Cooloing Fan (FAN6).
3.Replace the DC Controller PCB (PCB4).
Realize, not every error is entirely identical. What corrects the malfunction one occasion might not eliminate it the next time. While the information in this text originates from the service manual and oftentimes ought to get your unit up and running, from time to time other factors may be in play.
If you’re looking at this post and have knowledge of this malfunction and desire to share make sure you leave a comment underneath. Or, if you have read this article and have further questions then ask. If I have experience with the situation then I will reply.