Canon imageRUNNER 2545 E000 0001 Error Code Instructions
Below you will find the service manual information for the Canon imageRUNNER 2545 E000 0001 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it.
Service Manual Instructions for the Canon imageRUNNER 2545 E000 0001 Error Code
The temperature detected by the main thermistor does not rise to the specified value during startup control.
1.Go through the following to clear the error: CLEAR > ENGIN > ERRCLR; and then turn OFF and then ON the power.
2.Check connection of the Connectors (Thermistor Connector and AC Connector).
3.Replace the Fixing Main Thermistor (Film Unit).
4.Replace the Fixing Assembly.
5.Replace the DC Controller PCB (PCB4).
Realize, not every error is completely identical. What treats the situation one occasion may possibly not solve it the next time. While the guidance in this page comes from the service manual and typically should get your machine operational, in some cases additional circumstances can be in play.
If you’re looking at this post and have knowledge about this error message and would like to make a contribution please leave a comment below. Or, if you have read this article and have further questions then ask. If I have exposure to the issue then I will reply.