Canon imageRUNNER 2545 E003 0000 Error Code Instructions
Below you will find the service manual information for the Canon imageRUNNER 2545 E003 0000 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it.
Service Manual Instructions for the Canon imageRUNNER 2545 E003 0000 Error Code
The reading of the main thermistor is less than 140 deg C continuously for 400 msec or more.
1.Go through the following to clear the error: CLEAR > ENGIN > ERRCLR; and then turn OFF and then ON the power.
2.Check connection of the Connectors (Thermistor Connector and AC Connector).
3.Replace the Fixing Main Thermistor (Film Unit).
4.Replace the Fixing Assembly.
5.Replace the DC Controller PCB (PCB4).
Realize, not every error is completely identical. What corrects the difficulty one time might not exactly take care of it the next time. While the information in this piece of content comes from the service manual and most often should get your machine operational, on occasion other things could possibly be in play.
If you’re looking at this post and have exposure to this malfunction and want to make a contribution please be sure to leave a comment below. Or, if you have read this article and have additional questions then ask. If I have experience with the difficulty then I will answer back.