Canon imageRUNNER 2545 E110 0001 Error Code Instructions
Below you will find the service manual information for the Canon imageRUNNER 2545 E110 0001 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it.
Service Manual Instructions for the Canon imageRUNNER 2545 E110 0001 Error Code
The Scanner Motor (M21) speed lock signal does not indicate a locked state a specific period of time after the ScannerMotor (M21) has been started.
* The same condition is detected after the error retry is performed.
1.Check the cable.
2.Replace the Laser Scanner Unit.
3.Replace the DC Controller PCB (PCB4).
Please remember, not every error is totally identical. What treats the trouble one occasion might not remedy it the next occasion. While the content in this written piece comes from the service manual and normally ought to get your equipment functioning, occasionally other factors might be in play.
If you’re looking at this piece of content and have knowledge about this fault and want to share please leave a comment below. Or, if you have read this article and have additional questions then ask. If I have experience with the issue then I will answer.