Canon imageRUNNER 2545 E202 0000 Error Code Instructions
Below you will find the service manual information for the Canon imageRUNNER 2545 E202 0000 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it.
Service Manual Instructions for the Canon imageRUNNER 2545 E202 0000 Error Code
1.The attempt to detect the home position fails when the CCD is moved forward.
2.The attempt to detect the home position fails when the CCD is moved back.
1.Disconnect and then connect the flexible cable(Relay PCB (PCB2)-Main Controller PCB (PCB1) 64pin).
2.Replace the flexible cable.
3.Replace the CCD HP sensor (S22).
4.Replace the Scanner Motor (M21).
5.Replace the Relay PCB (PCB2).
6.Replace the Main Controller PCB (PCB1).
Please remember, not every error is simply identical. What treats the trouble one time may not solve it the next time. While the content in this short article hails from the service manual and most often should get your unit operational, now and again additional circumstances might be in play.
If you’re looking at this piece of content and have expertise in this error and would wish to make a contribution please make sure to leave a comment below. Or, if you have read this article and have more questions then ask. If I have information about the problem then I will respond.