Canon imageRUNNER 2545 E280 0000 Error Code Instructions
Below you will find the service manual information for the Canon imageRUNNER 2545 E280 0000 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it.
Service Manual Instructions for the Canon imageRUNNER 2545 E280 0000 Error Code
Reading error after writing.
1.Disconnect and then connect the flexible cable(Relay PCB (PCB2)-Main Controller PCB (PCB1) 50pin).
2.Disconnect and then connect the flexible cable(Relay PCB (PCB2)-Main Controller PCB (PCB1) 64pin).
3.Disconnect and then connect the flexible cable(CCD unit- Relay PCB (PCB2)).
4.Replace the flexible cable.
5.Replace the Relay PCB (PCB2).
6.Replace the Main Controller PCB (PCB1).
Please remember, not every error is precisely identical. What corrects the difficulty one occasion may not resolve it the next occasion. While the ideas in this piece of content is taken from the service manual and most often ought to get your device operating, sometimes other factors could possibly be in play.
If you’re looking at this piece of content and have experience with this fault and desire to share please be sure to leave a comment down below. Or, if you have read this article and have further questions then ask. If I have exposure to the issue then I will answer back.