Canon imageRUNNER 2545 E805 0003 Error Code Instructions
Below you will find the service manual information for the Canon imageRUNNER 2545 E805 0003 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it.
Service Manual Instructions for the Canon imageRUNNER 2545 E805 0003 Error Code
When lock signal failed to be detected for 5 sec while the Exhaust Fan (Front) (FAN4) is driven
* The same condition is detected after the error retry is performed.
1.Disconnect and then connect the connector (J206) on the DC Controller PCB (PCB4).
2.Replace the Exhaust Fan (Front) (FAN4).
3.Replace the DC Controller PCB (PCB4).
Please remember, not every error is absolutely identical. What remedies the situation one time may possibly not resolve it the next occasion. While the tips in this article derives from the service manual and in most cases ought to get your product operational, from time to time additional factors may be in play.
If you’re looking at this blog post and have knowledge of this fault and desire to share you should leave a comment beneath. Or, if you have read this article and have more questions then ask. If I have knowledge about the difficulty then I will answer.