Canon imageRUNNER 2545I E000 0001 Error Code Instructions
Below you will find the service manual information for the Canon imageRUNNER 2545I E000 0001 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it.
Service Manual Instructions for the Canon imageRUNNER 2545I E000 0001 Error Code
The temperature detected by the main thermistor does not rise to the specified value during startup control.
1.Go through the following to clear the error: CLEAR > ENGIN > ERRCLR; and then turn OFF and then ON the power.
2.Check connection of the Connectors (Thermistor Connector and AC Connector).
3.Replace the Fixing Main Thermistor (Film Unit).
4.Replace the Fixing Assembly.
5.Replace the DC Controller PCB (PCB4).
Please remember, not every error is absolutely alike. What treats the complication one occasion might not exactly remedy it the next time. While the data in this text comes from the service manual and in most cases should get your product up and running, sometimes other variables may be in play.
If you’re looking at this blog post and have knowledge about this problem and desire to make a contribution be sure to leave a comment underneath. Or, if you have read this article and have additional questions then ask. If I have knowledge about the issue then I will respond.