Canon imageRUNNER 2545I E001 0002 Error Code Instructions
Below you will find the service manual information for the Canon imageRUNNER 2545I E001 0002 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it.
Service Manual Instructions for the Canon imageRUNNER 2545I E001 0002 Error Code
The reading of the sub thermistor is 295 deg C or more continuously for 200 msec.
1.Go through the following to clear the error: CLEAR > ENGIN > ERRCLR; and then turn OFF and then ON the power.
2.Check connection of the Connectors (Thermistor Connector and AC Connector).
3.Replace the Fixing Main Thermistor (Film Unit).
4.Replace the Fixing Assembly.
5.Replace the DC Controller PCB (PCB4).
Please remember, not every error is absolutely alike. What fixes the issue one occasion might not resolve it the next occasion. While the details in this write-up derives from the service manual and normally should get your machine operational, from time to time additional circumstances can be in play.
If you’re looking at this blog post and have knowledge about this error and desire to make a contribution please be sure to leave a comment below. Or, if you have read this article and have additional questions then ask. If I have knowledge about the difficulty then I will answer back.