Canon imageRUNNER 2545I E003 0000 Error Code Instructions
Below you will find the service manual information for the Canon imageRUNNER 2545I E003 0000 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it.
Service Manual Instructions for the Canon imageRUNNER 2545I E003 0000 Error Code
The reading of the main thermistor is less than 140 deg C continuously for 400 msec or more.
1.Go through the following to clear the error: CLEAR > ENGIN > ERRCLR; and then turn OFF and then ON the power.
2.Check connection of the Connectors (Thermistor Connector and AC Connector).
3.Replace the Fixing Main Thermistor (Film Unit).
4.Replace the Fixing Assembly.
5.Replace the DC Controller PCB (PCB4).
Please remember, not every error is absolutely alike. What corrects the difficulty one time may not fix it the next occasion. While the ideas in this article obtain from the service manual and typically ought to get your unit working, at times other things might be in play.
If you’re looking at this blog post and have exposure to this problem and want to contribute be sure to leave a comment down below. Or, if you have read this article and have further questions then ask. If I have information about the issue then I will respond.