Canon imageRUNNER 2545I E010 0001 Error Code Instructions
Below you will find the service manual information for the Canon imageRUNNER 2545I E010 0001 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it.
Service Manual Instructions for the Canon imageRUNNER 2545I E010 0001 Error Code
Detection is executed every 100 msec after the start of motor rotation; however, the drive detection signal is absent for 2 sec.
1.Replace the Main Motor (M1).
2.Replace the DC Controller PCB (PCB4).
Please remember, not every error is absolutely alike. What corrects the complication one time might not fix it the next occasion. While the help and advice in this document is inspired by the service manual and most likely should get your product up and running, from time to time other things can be in play.
If you’re looking at this blog post and have exposure to this problem and desire to contribute please be sure to leave a comment below. Or, if you have read this article and have additional questions then ask. If I have experience with the issue then I will respond.