Canon imageRUNNER 2545I E010 0002 Error Code Instructions
Below you will find the service manual information for the Canon imageRUNNER 2545I E010 0002 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it.
Service Manual Instructions for the Canon imageRUNNER 2545I E010 0002 Error Code
During motor rotation, detection is executed every 100 msec; however, the drive signal is absent 5 times in sequence.
1.Replace the Main Motor (M1).
2.Replace the DC Controller PCB (PCB4).
Note, not every error is totally the same. What treats the difficulty one occasion might not resolve it the next occasion. While the information in this post comes from the service manual and normally should get your product functioning, occasionally additional variables might be in play.
If you’re looking at this blog post and have exposure to this malfunction and would like to share please make sure to leave a comment down the page. Or, if you have read this article and have more questions then ask. If I have experience with the difficulty then I will answer back.