Canon imageRUNNER 2545I E014 0002 Error Code Instructions
Below you will find the service manual information for the Canon imageRUNNER 2545I E014 0002 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it.
Service Manual Instructions for the Canon imageRUNNER 2545I E014 0002 Error Code
During motor rotation, detection is executed every 100 msec; however, the drive signal is absent 5 times in sequence.
1.Replace the Fixing Motor (M2).
2.Replace the DC Controller PCB (PCB4).
Note, not every error is totally the same. What fixes the condition one occasion might not exactly remedy it the next time. While the data in this text comes from the service manual and most often should get your machine ready to go, now and again additional circumstances could possibly be in play.
If you’re looking at this blog post and have exposure to this fault and would like to make a contribution you should leave a comment down below. Or, if you have read this article and have more questions then ask. If I have experience with the trouble then I will answer back.