Canon imageRUNNER 2545I E024 0001 Error Code Instructions
Below you will find the service manual information for the Canon imageRUNNER 2545I E024 0001 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it.
Service Manual Instructions for the Canon imageRUNNER 2545I E024 0001 Error Code
2.5 seconds, and the counter increments 1 count every 25 times when the sensor goes on, and 300 counts are reached.
1.Check connection of the Connector (J207).
2.Correct the cable.
3.Replace the Developing Assembly Toner Sensor (TS1).
Note, not every error is totally alike. What remedies the problem one time may not remedy it the next occasion. While the help and advice in this written piece is taken from the service manual and most often should get your product operational, sometimes other factors may be in play.
If you’re looking at this blog post and have exposure to this error and want to make a contribution make sure you leave a comment beneath. Or, if you have read this article and have additional questions then ask. If I have experience with the situation then I will answer.