Canon imageRUNNER 2545I E202 0000 Error Code Instructions
Below you will find the service manual information for the Canon imageRUNNER 2545I E202 0000 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it.
Service Manual Instructions for the Canon imageRUNNER 2545I E202 0000 Error Code
1.The attempt to detect the home position fails when the CCD is moved forward.
2.The attempt to detect the home position fails when the CCD is moved back.
1.Disconnect and then connect the flexible cable(Relay PCB (PCB2)-Main Controller PCB (PCB1) 64pin).
2.Replace the flexible cable.
3.Replace the CCD HP sensor (S22).
4.Replace the Scanner Motor (M21).
5.Replace the Relay PCB (PCB2).
6.Replace the Main Controller PCB (PCB1).
Note, not every error is simply identical. What remedies the condition one occasion may possibly not take care of it the next occasion. While the specifics in this writing is inspired by the service manual and most likely ought to get your unit working, sometimes other things can be in play.
If you’re looking at this article and have information about this malfunction and would like to share please be sure to leave a comment below. Or, if you have read this article and have more questions then ask. If I have knowledge about the trouble then I will answer back.