Canon imageRUNNER 2545I E531 8001 Error Code Instructions
Below you will find the service manual information for the Canon imageRUNNER 2545I E531 8001 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it.
Service Manual Instructions for the Canon imageRUNNER 2545I E531 8001 Error Code
The stapler does not leave the staple home position when the Staple Motor (M10) has been driven for 0.5 sec.
1.Check the wiring between the Finisher Controller PCB and Stapler.
2.Replace the Stapler.
3.Replace the Finisher Controller PCB (PCB1).
Note, not every error is exactly the same. What fixes the difficulty one occasion will possibly not resolve it the next time. While the help and advice in this blog post is inspired by the service manual and normally should get your device working, on occasion additional circumstances could possibly be in play.
If you’re looking at this article and have expertise in this malfunction and wish to make a contribution please make sure to leave a comment down below. Or, if you have read this article and have additional questions then ask. If I have exposure to the difficulty then I will answer.