Canon imageRUNNER 2545I E532 0002 Error Code Instructions
Below you will find the service manual information for the Canon imageRUNNER 2545I E532 0002 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it.
Service Manual Instructions for the Canon imageRUNNER 2545I E532 0002 Error Code
The stapler does not return to the stapler move home position when the STP Move Motor (M1) has been driven for 2.8 sec.
1.Replace the Stapler Move HP Sensor (S10).
2.Check the wiring between the Finisher Controller PCB and the STP Move Motor.
3.Check the stapler shift base.
4.Replace the STP Move Motor (M1).
5.Replace the Finisher Controller PCB (PCB1).
Note, not every error is exactly identical. What remedies the complication one occasion may not resolve it the next time. While the details in this posting is obtained from the service manual and most often should get your piece of equipment functioning, sometimes additional variables may be in play.
If you’re looking at this article and have expertise in this error and desire to share please make sure to leave a comment beneath. Or, if you have read this article and have additional questions then ask. If I have exposure to the situation then I will answer back.