Canon imageRUNNER 2545I E567 0001 Error Code Instructions
Below you will find the service manual information for the Canon imageRUNNER 2545I E567 0001 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it.
Service Manual Instructions for the Canon imageRUNNER 2545I E567 0001 Error Code
The shift roller does not leave the shift roller release home position when the Shift Roller
Release Motor (M5) has been driven for 0.1 sec.
1.Replace the Shift Roller Release Sensor (S3).
2.Replace the Shift Roller Release Motor (M5).
3.Replace the Finisher Controller PCB (PCB1).
Note, not every error is exactly alike. What fixes the malfunction one time might not exactly get rid of it the next occasion. While the advice in this post is taken from the service manual and generally should get your device functioning, now and again other causes might be in play.
If you are reading this write-up and have knowledge of this error message and would like to contribute please leave a comment below. Or, if you have read this article and have additional questions then ask. If I have experience with the trouble then I will reply.