Canon imageRUNNER 2545I E567 0002 Error Code Instructions
Below you will find the service manual information for the Canon imageRUNNER 2545I E567 0002 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it.
Service Manual Instructions for the Canon imageRUNNER 2545I E567 0002 Error Code
The shift roller does not return to the shift roller release home position when the Shift Roller Release Motor (M5) has been driven for 0.06 sec.
1.Replace the Shift Roller Release Sensor (S3).
2.Replace the Shift Roller Release Motor (M5).
3.Replace the Finisher Controller PCB (PCB1).
Note, not every error is exactly alike. What fixes the condition one time may possibly not get rid of it the next time. While the specifics in this blog is taken from the service manual and oftentimes should get your product operating, on occasion other causes might be in play.
If you are reading this write-up and have knowledge of this error message and wish to contribute please make sure to leave a comment down below. Or, if you have read this article and have additional questions then ask. If I have exposure to the issue then I will answer back.