Canon imageRUNNER 2545I E575 0001 Error Code Instructions
Below you will find the service manual information for the Canon imageRUNNER 2545I E575 0001 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it.
Service Manual Instructions for the Canon imageRUNNER 2545I E575 0001 Error Code
The gripper unit does not leave the gripper unit home position when the Gripper Unit Move Motor (M2) has been driven for 3.8 seconds.
1.Replace the Gripper Unit HP Sensor (S7).
2.Replace the Gripper Unit Move Motor (M2).
3.Replace the Finisher Controller PCB (PCB1).
Note, not every error is entirely the same. What fixes the trouble one occasion may possibly not get rid of it the next occasion. While the details in this write-up derives from the service manual and oftentimes ought to get your product working, occasionally additional circumstances can be in play.
If you are reading this write-up and have knowledge about this error and desire to make a contribution be sure to leave a comment down the page. Or, if you have read this article and have additional questions then ask. If I have information about the trouble then I will reply.