Canon imageRUNNER 2545I E805 0002 Error Code Instructions
Below you will find the service manual information for the Canon imageRUNNER 2545I E805 0002 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it.
Service Manual Instructions for the Canon imageRUNNER 2545I E805 0002 Error Code
When lock signal is detected for 5 sec while the Exhaust Fan (Front) (FAN4) is stopped
* The same condition is detected after the error retry is performed.
1.Disconnect and then connect the connector (J206) on the DC Controller PCB (PCB4).
2.Replace the Exhaust Fan (Front) (FAN4).
3.Replace the DC Controller PCB (PCB4).
Note, not every error is completely alike. What fixes the problem one occasion will possibly not get rid of it the next time. While the information in this piece of content is inspired by the service manual and typically ought to get your equipment operational, occasionally additional factors might be in play.
If you are reading this short article and have exposure to this problem and would wish to contribute please be sure to leave a comment underneath. Or, if you have read this article and have additional questions then ask. If I have exposure to the situation then I will respond.