Canon imageRUNNER 2025i E261 0000 Error Code Instructions
Below you will find the service manual information for the Canon imageRUNNER 2025i E261 0000 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it.
Service Manual Instructions for the Canon imageRUNNER 2025i E261 0000 Error Code
Zero-cross signal error
If failed to detect zero-cross signal cycle of the power supply when initializing.
When the input of the zero-signal failed continuously for three seconds while controlling the temperature adjustment.
Replace the power supply PCB.
Replace the DC controller PCB.
Take into account, not every error is totally alike. What corrects the situation one time will possibly not eliminate it the next time. While the specifics in this write-up originates from the service manual and in most cases ought to get your product ready to go, on occasion other causes may be in play.
If you are looking over this write-up and have knowledge about this error message and would wish to share make sure you leave a comment down the page. Or, if you have read this article and have further questions then ask. If I have exposure to the trouble then I will respond.