Canon imageRUNNER 2025i E719 0002 Error Code Instructions
Below you will find the service manual information for the Canon imageRUNNER 2025i E719 0002 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it.
Service Manual Instructions for the Canon imageRUNNER 2025i E719 0002 Error Code
Erroneous communication with coin vendor (serial communication)
Disconnection from the coin vendor has been detected since communication started after confirmation of normal connection to the coin vendor (after power-on).
A serial communication error has occurred. (The serial communication error cannot be recovered.)
Check the connection between the image processor PCB and serial PCB.
Check the connectors of the serial PCB and coin vendor for normal connection.
Replace the serial PCB.
Check the coin vendor.
Replace the image processor PCB.
Take into account, not every error is simply the same. What corrects the trouble one occasion might not take care of it the next occasion. While the data in this writing is obtained from the service manual and normally should get your piece of equipment operational, sometimes other reasons may be in play.
If you are looking over this write-up and have knowledge of this malfunction and would like to share please be sure to leave a comment down the page. Or, if you have read this article and have more questions then ask. If I have exposure to the issue then I will answer.