Canon imageRUNNER 2535 E001 0000 Error Code Instructions
Below you will find the service manual information for the Canon imageRUNNER 2535 E001 0000 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it.
Service Manual Instructions for the Canon imageRUNNER 2535 E001 0000 Error Code
The reading of the main thermistor is 250 deg C or more continuously for 200 msec.
1.Go through the following to clear the error: CLEAR > ENGIN > ERRCLR; and then turn OFF and then ON the power.
2.Check connection of the Connectors (Thermistor Connector and AC Connector).
3.Replace the Fixing Main Thermistor (Film Unit).
4.Replace the Fixing Assembly.
5.Replace the DC Controller PCB (PCB4).
Remember, not every error is absolutely the same. What remedies the difficulty one occasion may not remedy it the next occasion. While the data in this written piece is inspired by the service manual and normally ought to get your equipment working, at times other elements might be in play.
If you’re looking over this piece of content and have exposure to this problem and desire to make a contribution be sure to leave a comment down below. Or, if you have read this article and have further questions then ask. If I have knowledge about the trouble then I will answer.