Canon imageRUNNER 2535 E110 0001 Error Code Instructions
Below you will find the service manual information for the Canon imageRUNNER 2535 E110 0001 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it.
Service Manual Instructions for the Canon imageRUNNER 2535 E110 0001 Error Code
The Scanner Motor (M21) speed lock signal does not indicate a locked state a specific period of time after the ScannerMotor (M21) has been started.
* The same condition is detected after the error retry is performed.
1.Check the cable.
2.Replace the Laser Scanner Unit.
3.Replace the DC Controller PCB (PCB4).
Remember that, not every error is simply the same. What corrects the condition one time might not exactly eliminate it the next occasion. While the specifics in this post obtain from the service manual and most likely should get your device functioning, sometimes other factors may be in play.
If you’re looking over this page and have knowledge about this problem and would wish to share please be sure to leave a comment underneath. Or, if you have read this article and have more questions then ask. If I have information about the issue then I will respond.