Canon imageRUNNER 2535I E001 0001 Error Code Instructions
Below you will find the service manual information for the Canon imageRUNNER 2535I E001 0001 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it.
Service Manual Instructions for the Canon imageRUNNER 2535I E001 0001 Error Code
The hardware circuit detects overheating of the main or sub thermistor for 200 msec.
1.Go through the following to clear the error: CLEAR > ENGIN > ERRCLR; and then turn OFF and then ON the power.
2.Replace the DC Controller PCB (PCB4).
Remember that, not every error is completely alike. What remedies the difficulty one time will possibly not resolve it the next occasion. While the tips in this post is taken from the service manual and most often ought to get your machine operating, on occasion other causes could possibly be in play.
If you’re looking over this blog post and have experience with this problem and wish to share make sure you leave a comment down the page. Or, if you have read this article and have further questions then ask. If I have information about the issue then I will answer.