Canon imageRUNNER 2535I E520 0002 Error Code Instructions
Below you will find the service manual information for the Canon imageRUNNER 2535I E520 0002 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it.
Service Manual Instructions for the Canon imageRUNNER 2535I E520 0002 Error Code
The shift roller does not return to the shift roller home position when the Shift Motor (M4) has been driven for 1.2 seconds.
1.Replace the Shift Roller HP Sensor (S2).
2.Replace the Shift Motor (M4).
3.Replace the Finisher Controller PCB (PCB1).
Realize, not every error is simply alike. What fixes the problem one occasion may not take care of it the next time. While the guidance in this piece of content is taken from the service manual and normally ought to get your unit up and running, at times other reasons can be in play.
If you’re looking at this write-up and have expertise in this problem and would wish to share you should leave a comment down below. Or, if you have read this article and have further questions then ask. If I have experience with the difficulty then I will answer.