Canon imageRUNNER 2535I E540 0005 Error Code Instructions
Below you will find the service manual information for the Canon imageRUNNER 2535I E540 0005 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it.
Service Manual Instructions for the Canon imageRUNNER 2535I E540 0005 Error Code
The FG input cannot be detected when the Tray Lift Motor (M11) has been driven for 0.1 second.
1.Replace the Stack Tray Clock Sensor (S13).
2.Replace the Tray Lift Motor (M11).
3.Replace the Finisher Controller PCB (PCB1).
Realize, not every error is precisely alike. What treats the trouble one occasion will possibly not get rid of it the next occasion. While the advice in this writing hails from the service manual and most often ought to get your machine up and running, occasionally other causes can be in play.
If you’re looking at this write-up and have experience with this problem and desire to share be sure to leave a comment down below. Or, if you have read this article and have further questions then ask. If I have exposure to the difficulty then I will reply.