Canon imageRUNNER 2545I E001 0000 Error Code Instructions
Below you will find the service manual information for the Canon imageRUNNER 2545I E001 0000 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it.
Service Manual Instructions for the Canon imageRUNNER 2545I E001 0000 Error Code
The reading of the main thermistor is 250 deg C or more continuously for 200 msec.
1.Go through the following to clear the error: CLEAR > ENGIN > ERRCLR; and then turn OFF and then ON the power.
2.Check connection of the Connectors (Thermistor Connector and AC Connector).
3.Replace the Fixing Main Thermistor (Film Unit).
4.Replace the Fixing Assembly.
5.Replace the DC Controller PCB (PCB4).
Please remember, not every error is absolutely alike. What remedies the issue one occasion might not solve it the next time. While the info in this piece of content hails from the service manual and typically ought to get your unit operational, in some cases other reasons might be in play.
If you’re looking at this blog post and have knowledge about this error message and desire to share please be sure to leave a comment beneath. Or, if you have read this article and have further questions then ask. If I have knowledge about the situation then I will answer back.