Canon imageRUNNER 2545I E571 0002 Error Code Instructions
Below you will find the service manual information for the Canon imageRUNNER 2545I E571 0002 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it.
Service Manual Instructions for the Canon imageRUNNER 2545I E571 0002 Error Code
The gripper unit does not return to the gripper unit home position when the Gripper Open/Close Motor (M7) has been driven for 0.15 seconds.
1.Replace the Grip Arm Sensor (S13).
2.Replace the Gripper Open/Close Motor (M7).
3.Replace the Finisher Controller PCB (PCB1).
Note, not every error is entirely the same. What fixes the trouble one time may not solve it the next occasion. While the data in this writing is inspired by the service manual and most often ought to get your piece of equipment up and running, from time to time additional factors might be in play.
If you are reading this write-up and have knowledge about this malfunction and wish to share please leave a comment below. Or, if you have read this article and have more questions then ask. If I have exposure to the difficulty then I will reply.