Canon imageRUNNER 2545I E716 0010 Error Code Instructions
Below you will find the service manual information for the Canon imageRUNNER 2545I E716 0010 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it.
Service Manual Instructions for the Canon imageRUNNER 2545I E716 0010 Error Code
When the communication with the 2-way unit is faulty after detecting the connection with the finisher.
1.Install the 2-way unit.
2.Check the cable.
3.Replace the DC Controller PCB (PCB4).
4.Replace the 2-way unit driver PCB.
Note, not every error is entirely identical. What remedies the complication one time might not take care of it the next time. While the guidance in this blog post originates from the service manual and usually should get your piece of equipment working, from time to time other causes could possibly be in play.
If you are reading this write-up and have experience with this malfunction and would wish to contribute make sure you leave a comment beneath. Or, if you have read this article and have more questions then ask. If I have experience with the situation then I will answer back.